Swivel wall mounting
For more information contact us
Accessories
Rotary mounting
For more Information contact us
Double deflection rollers
UD:The double deflection roller is used for spiral-winding cable reels and deflects the windable cable from the higher-positioned reel. it is also used for passing the feed deflection guide.
UDQ: The double deflection roller with lateral roller is used with cylindrical winding cable reels and deflects the windable cable from the higher-positioned cable reel. It is also used for passing the feed deflection guide.
Cable deflection and guide rollers
Cable deflection and guide rollers are used where cable payout cannot be effected directly from the cable reel. The roller core diameter must have a minimum of 15x the cable diameter.
Cable pulling grip
The cable pulling grip is matched to the cable diameter and provides local strain relief at the fixed end of the windable cable. The cable pulling grip counteracts point load by distributing the strain over a wider area. The cable pulling grip is designed for 3 times the maximum tensile force of a conventional strain relief element. It is only suitable for use with horizontal payout.
Roller yoke
A rigid roller yoke ensures the windable cable winds and unwinds smoothly and evenly. It has two plastic rollers to prevent cable damage. The cable can easily be unwound in the defined direction. The roller yoke can be retrofitted to the mounting flange.
Ratchet
The ratchet enables the device to be locked and stops the winding process, with one ratchet step per rotation as standard. The ratchet bar opens when the spring drive is released and the cable is wound onto the reel. The ratchet can be adjusted to 2 ratchet steps per rotation if required. Multiple ratchets can be fitted to a device. The ratchet can be retrofitted to the mounting flange.